.png)
Model Number : NI-PMCC-101
Compliance Standard : ASTM D93, IS 1448 Part-21, IS 1209, IS 1448 Part 66, ISO 2719, IP 34,
Description :-
1. NI-PMCC-101 is used for determination of diesel, biodiesel blends, Kerosine, heating oils, turbine fuels, residual fuel oil, cutback residual oil, used lubricating oils, solvents and other petroleum products.
2. A brass cup of specified dimensions, filled to the inside mark with test specimen and fitted with a cover of specified dimensions is heated and the specimen is stirred at specified rates according to the procedure.
3. Voltage variac is used adjust and control the heating rate as per test sample. Normally the heating rate is increased initially and as the flash point approaches it is decreased to avoid false and missed detections.
4. RPM is controlled through Potentiometer and is adjusted between 90-120 rpm according to procedure A and 240-260 rpm according to procedure B. The shaft is connected to a geared motor and adjusted using the potentiometer knob.
5. Gas ignition is provided with flow controller to adjust and hold the test flame during the test. The flow controller is used to turn on /off and adjust the test-flame as per requirement.
6. The PT100 temperature sensor is placed on the shutter assembly mounted on the cup, immersed inside the sample. The temperature is displayed on indicator with bright LED having 0.1°C resolution.
7. The instrument has advantages of accurate measurement, good repeatability, simple operation with stable and reliable performance. It is widely used in petroleum, Electric, Chemical industries, commodity inspection, railways and research laboratories.
Technical Specifications :
|
Display |
LED display for Temp. resolution and Stirring rpm. |
|
Measurement range |
Room temperature – 400°C. |
|
Heater power |
750 Watt. |
|
Temp Control |
Voltage Variac for adjusting & Controlling heating rate |
|
Temp. resolution |
0.1°C. |
|
Heating rate |
(1-12°C/min) – Controllable and adjustable |
|
Stirring device |
Gear motor with flexible shaft fitted inside the test-cup. |
|
Igniting mode |
LP gas, butane gas, pipeline gas or natural gas. |
|
Temp. sensor |
3 Wire RTD Sensor mounted inside the test-cup |
|
Stirring rate |
Procedure A : (90-120) rpm Procedure B : (250 +/- 10) rpm |
|
RPM Indication |
Digital |
|
Test-cup |
Internal Diameter = 50.7 to 50.8 mm Depth = 55.7 – 56 mm Marking depth of oil testing capacity = 33.9 – 34.3mm Oil test capacity = 70 ml |
|
Operating temp |
Ambient or ≤ 35°C |
|
Relative humidity |
≤ 85% |
|
Power consumption |
750 Watt |
|
Power Supply |
220V AC +/- 10% , 50HZ Frequency |
|
Dimension |
L = 16”(40cm) x W = 12”(31cm) x H = 15” (38cm) |
|
Weight |
15 Kgs |
Optional Accessories :
1) Test cup (NI-PMCC-01)
2) Test-flame applicator (NI-PMCC-02)
3) Gas Control valve (NI-PMCC-03)
4) Heater (NI-PMCC-04)
5) Thermometer (NI-PMCC-05)
6) IP 15C / ASTM 9C – Low Pensky marten : -5°C to 110°C / 0.5° L.C.
7) IP 16C / ASTM 10C – High Pensky marten : 90°C to 370°C / 2°L.C.
8) NABL Calibration test certificate (NI-PMCC-06)
Shipping details :
a) Wooden box : L = 24”(60cm ) x W = 20”(50cm) x H = 22”(55cm)
b) Shipping Weight : 35-40 Kgs (100Lbs)
Note : Shipping Dimensions are approx. and may vary according to the packing.
We cover the following Industrial, Commercial & Residential areas:
Click Now to Send Inquiry!